Categories
Machinery

14 inch Bandsaw Blade

14 inch Bandsaw Blade
14 inch Bandsaw Blade

We manufacture a 14 inch Bandsaw Blade to cut metal in different forms. These machines are used in metalworking industries for cutting operations

A 14-inch bandsaw blade is a long, continuous loop of metal with teeth along one edge that is designed for cutting a wide variety of materials. It is typically made from high-carbon steel or high-speed steel and has a blade length of 93.5 to 95 inches. This blade length is compatible with most standard 14-inch bandsaw machines. The tooth pitch of a 14-inch bandsaw blade can vary depending on the application. A 14 TPI blade is a good all-purpose blade that is suitable for cutting a wide variety of materials, while a 10 TPI blade is better for cutting thick materials and a 18 TPI blade is better for cutting thin materials.

Common Applications of 14-inch Bandsaw Blades:

  • Cutting metal pipes and tubes
  • Cutting metal sheets
  • Cutting structural steel beams
  • Cutting metal bars and rods
  • Cutting non-ferrous metals

Factors to Consider When Choosing a 14-inch Bandsaw Blade:

  • Material to be cut: Different types of metal have different hardness levels. Harder metals, such as steel, require a blade with a higher tooth count, while softer metals, such as aluminum, require a blade with a lower tooth count.
  • Thickness of the material: Thicker materials require a blade with a wider width, while thinner materials require a blade with a narrower width.
  • Type of cut: Straight cuts require a blade with a regular tooth set, while curved cuts require a blade with a wavy tooth set.
  • Cutting speed: Faster cutting speeds require a blade with a higher tooth pitch, while slower cutting speeds require a blade with a lower tooth pitch.
  • Precision requirements: If you need a very precise cut, choose a blade with a high tooth count and a sharp edge.

Maintenance and Care of 14-inch Bandsaw Blades:

  • Clean the blade after each use to remove debris and prevent rusting.
  • Inspect the blade for cracks, wear, or missing teeth. Replace the blade if it becomes damaged.
  • Store the blade properly to prevent rusting and bending.

Examples of 14-inch Bandsaw Blades:

  • Supercut Bandsaw Blade, Carbon Tool Steel, 14-Inch x 1/2-Inch x 0.025-Inch x 14 TPI
  • Imachinist S64514 Bi-Metal Band Saw Blades 64-1/2″ X 1/2″ X 14tpi for Cutting Soft Ferrous Metal
  • Bosch BS6412-24M 64-1/2 In. 24 TPI Metal Cutting Stationary Band Saw Blade
  • Olson Bandsaw Blade, 10/12 TPI, 0.035″ Thickness
  • Lenox Classic Tuff Tooth Band Saw Blade, Bimetal, Regular Tooth, Wavy

These are just a few examples of the many 14-inch bandsaw blades available on the market. The best blade for your specific needs will depend on the factors mentioned above.

14 inch Bandsaw Blade

A 14-inch bandsaw blade is a continuous loop of metal with teeth along one edge, designed for cutting a wide variety of materials. It is typically made from high-carbon steel or high-speed steel and has a tooth pitch of 14 teeth per inch (TPI). This tooth pitch is suitable for cutting a wide variety of materials, including wood, metal, and plastic.

Here are some of the key features of a 14-inch bandsaw blade:

  • Durability: High-carbon steel and high-speed steel are both very durable materials that can withstand heavy use. This makes 14-inch bandsaw blades a good choice for professional and industrial applications.
  • Versatility: The 14 TPI tooth pitch is suitable for cutting a wide variety of materials, from thin sheets to thick bars. This makes 14-inch bandsaw blades a good choice for a variety of cutting tasks.
  • Precision: 14-inch bandsaw blades are very precise and can make accurate cuts. This is because the high-carbon steel or high-speed steel provides the blade with a sharp edge that can easily cut through materials.
  • Efficiency: 14-inch bandsaw blades are very efficient and can cut quickly and easily. This is because the high-carbon steel or high-speed steel provides the blade with a hard edge that can quickly penetrate materials.

Here are some of the applications of a 14-inch bandsaw blade:

  • Woodworking:
    • Ripping lumber: Cutting lumber lengthwise to create thinner pieces.
    • Crosscutting lumber: Cutting lumber across its width to create shorter pieces.
    • Cutting curves: Cutting curved shapes in wood.
    • Cutting delicate materials: Cutting delicate materials, such as veneer, with precision.
  • Metalworking:
    • Cutting metal pipes and tubes
    • Cutting metal sheets
    • Cutting structural steel beams
    • Cutting metal bars and rods
    • Cutting non-ferrous metals
  • Plastic cutting
  • Food processing:
    • Cutting meat, poultry, and fish
    • Cutting cheese, fruits, and vegetables
    • Cutting bread, cakes, and pastries

In addition to these general application areas, there are many specialized uses for bandsaw blades. For example, bandsaw blades are used in the construction industry to cut rebar and angle iron. They are also used in the aerospace industry to cut aircraft components. And they are used in the automotive industry to cut engine parts and other components.

When choosing a 14-inch bandsaw blade, it is important to consider the following factors:

  • The type of material you are cutting: Different types of material have different hardness levels. Hardwood, such as steel, is harder than softwood, such as aluminum. You will need a blade with a higher tooth count for harder materials and a blade with a lower tooth count for softer materials.
  • The thickness of the material you are cutting: You will need a blade with a wider width for thicker material and a blade with a narrower width for thinner material.
  • The type of cut you are making: You will need a blade with a regular tooth set for straight cuts and a blade with a wavy tooth set for curved cuts.
  • The speed at which you need to cut: If you need to cut quickly, choose a blade with a higher tooth pitch. If you need a smooth finish, choose a blade with a lower tooth pitch.
  • The accuracy of the cut: If you need a very accurate cut, choose a blade with a high-quality finish.

If you are not sure which 14-inch bandsaw blade is right for you, consult with a bandsaw blade expert at a local hardware store or online retailer. They can help you choose the right blade for your specific needs.

Here are some examples of 14-inch bandsaw blades:

  • Supercut Bandsaw Blade, Carbon Tool Steel, 14-Inch x 1/2-Inch x 0.025-Inch x 14 TPI: This blade is made from high-carbon steel and is suitable for cutting a wide variety of materials, including wood, metal, and plastic.
  • Imachinist S64514 Bi-Metal Band Saw Blades 64-1/2″ X 1/2″ X 14tpi for Cutting Soft Ferrous Metal: This blade is made from bi-metal and has a variable tooth pitch, making it versatile for cutting both thin and thick materials.
  • Bosch BS6412-24M 64-1/2 In. 24 TPI Metal Cutting Stationary Band Saw Blade: This blade is made from high-carbon steel and is suitable for cutting a wide variety of metals, including mild steel, stainless steel, and aluminum

EMS Metalworking Machinery

We design, manufacture and assembly metalworking machinery such as:

  • Hydraulic transfer press
  • Glass mosaic press
  • Hydraulic deep drawing press
  • Casting press
  • Hydraulic cold forming press
  • Hydroforming press
  • Composite press
  • Silicone rubber moulding press
  • Brake pad press
  • Melamine press
  • SMC & BMC Press
  • Labrotaroy press
  • Edge cutting trimming machine
  • Edge curling machine
  • Trimming beading machine
  • Trimming joggling machine
  • Cookware production line
  • Pipe bending machine
  • Profile bending machine
  • Bandsaw for metal
  • Cylindrical welding machine
  • Horizontal pres and cookware
  • Kitchenware, hotelware
  • Bakeware and cuttlery production machinery

as a complete line as well as an individual machine such as:

  • Edge cutting trimming beading machines
  • Polishing and grinding machines for pot and pans
  • Hydraulic drawing presses
  • Circle blanking machines
  • Riveting machine
  • Hole punching machines
  • Press feeding machine

You can check our machinery at work at: EMS Metalworking Machinery – YouTube

Applications:

  • Beading and ribbing
  • Flanging
  • Trimming
  • Curling
  • Lock-seaming
  • Ribbing
  • Flange-punching