Categories
Machinery

100 Ton Hydraulic Press Specifications

100 Ton Hydraulic Press Specifications
100 Ton Hydraulic Press Specifications

We manufacture the 100 Ton Hydraulic Press Specifications to bend sheet metal edges. Hydraulic Press Machines are used in metalworking industries

Here are some common specifications for a 100 ton hydraulic press:

  1. Force: 100 tons (200,000 lbs)
  2. Bed size: typically around 48 inches by 24 inches
  3. Stroke length: typically around 8 to 12 inches
  4. Daylight opening: typically around 12 to 16 inches
  5. Hydraulic system: powered by an electric motor and hydraulic pump, with a hydraulic cylinder to generate force.
  6. Control system: typically includes a control panel with buttons and switches for operating the press.
  7. Speed: variable speed control, with rapid advance and retract speeds.
  8. Safety features: may include safety curtains, emergency stop buttons, and overload protection.
  9. Frame construction: heavy-duty steel construction for strength and durability.

It’s important to note that the specifications for a 100 ton hydraulic press can vary depending on the specific model and manufacturer.

100 Ton Hydraulic Press Specifications

Capacity: 100 tons (200,000 lbs)

Stroke Length: Typically between 8 and 12 inches (203 and 305 mm)

Work Table Size: Typically around 48 inches by 24 inches (1219 by 610 mm)

Ram Speed: Adjustable, typically ranging from 10 to 60 inches per minute (254 to 1524 mm/min)

Opening Height: Typically between 12 and 16 inches (305 and 406 mm)

Daylight: Typically between 12 and 16 inches (305 and 406 mm)

Pump Capacity: Typically between 5 and 10 liters per minute (1.3 and 2.6 gallons per minute)

Motor Power: Typically between 5 and 10 horsepower (3.7 and 7.5 kW)

Control System: Manual, semi-automatic, or fully automatic control options

Safety Features: Safety interlocks, light curtains, emergency stop buttons

Additional Features: Adjustable work table height, tool change systems, integrated data acquisition systems (optional)

Applications:

  • Metalworking: Bending, forming, straightening, pressing of metal components
  • Manufacturing: Production of metal parts for automotive, aerospace, and other industries
  • Construction: Forming and shaping of sheet metal components for roofing, cladding, and structural elements

Please note that these specifications are just a general guideline, and the actual specifications may vary depending on the specific model and manufacturer. It is always best to consult with the manufacturer or supplier of the press to get the most accurate specifications.

Application Areas

A 100 ton hydraulic press can be used in various industries for a wide range of applications, such as:

  1. Metal fabrication: hydraulic presses are commonly used in metal fabrication to bend, punch, and cut metal sheets and plates.
  2. Automotive industry: hydraulic presses are used in the manufacturing of automotive parts, such as brake components, suspension parts, and engine components.
  3. Aerospace industry: hydraulic presses are used in the production of aircraft parts and components, such as wing panels and fuselage components.
  4. Plastic and rubber industry: hydraulic presses are used in the production of plastic and rubber parts, such as molded parts and extruded profiles.
  5. Construction industry: hydraulic presses are used in the production of concrete and clay bricks and tiles.
  6. Electrical industry: hydraulic presses are used in the production of electrical components such as circuit boards and switches.

Overall, the 100 ton hydraulic press is a versatile tool that can be used in many different industries for a variety of applications.

Operation

A 100 ton hydraulic press works on the principle of Pascal’s law, which states that pressure applied to a fluid in a closed container is transmitted equally in all directions. The press uses hydraulic fluid (usually oil) to generate force, which is then transmitted to the workpiece through a hydraulic cylinder.

The basic components of a hydraulic press include:

  1. Hydraulic pump: This is the component that supplies pressurized hydraulic fluid to the system.
  2. Hydraulic cylinder: This component converts the hydraulic pressure into mechanical force. The hydraulic cylinder consists of a piston and a cylinder, with the piston being pushed by the hydraulic fluid.
  3. Control system: This system controls the operation of the hydraulic press. It includes components such as valves, switches, and sensors.

Here’s how a 100 ton hydraulic press typically works:

  1. The hydraulic pump supplies pressurized hydraulic fluid to the system.
  2. The press operator loads the workpiece onto the press bed.
  3. The hydraulic cylinder extends, pushing the ram (the component that applies force to the workpiece) down onto the workpiece.
  4. The force of the ram compresses the workpiece, causing it to deform or bend.
  5. Once the desired amount of force has been applied, the hydraulic cylinder retracts, and the ram lifts off the workpiece.
  6. The operator removes the finished workpiece from the press bed.

Overall, a hydraulic press is a versatile tool that can be used for a wide range of applications, and the specific operation of a 100 ton hydraulic press can vary depending on the specific model and manufacturer.

EMS Metalworking Machinery

We design, manufacture and assembly metalworking machinery such as:

  • Hydraulic transfer press
  • Glass mosaic press
  • Hydraulic deep drawing press
  • Casting press
  • Hydraulic cold forming press
  • Hydroforming press
  • Composite press
  • Silicone rubber moulding press
  • Brake pad press
  • Melamine press
  • SMC & BMC Press
  • Labrotaroy press
  • Edge cutting trimming machine
  • Edge curling machine
  • Trimming beading machine
  • Trimming joggling machine
  • Cookware production line
  • Pipe bending machine
  • Profile bending machine
  • Bandsaw for metal
  • Cylindrical welding machine
  • Horizontal pres and cookware
  • Kitchenware, hotelware
  • Bakeware and cuttlery production machinery

as a complete line as well as an individual machine such as:

  • Edge cutting trimming beading machines
  • Polishing and grinding machines for pot and pans
  • Hydraulic drawing presses
  • Circle blanking machines
  • Riveting machine
  • Hole punching machines
  • Press feeding machine

You can check our machinery at work at: EMS Metalworking Machinery – YouTube

Applications:

  • Beading and ribbing
  • Flanging
  • Trimming
  • Curling
  • Lock-seaming
  • Ribbing
  • Flange-punching